Radio Frequency Magnetoelectric Effect Measured at High Temperature

Magnetoelectric response at the radio frequency range has been studied as a function of temperature. For that purpose, we have fabricated sandwich-type laminated composites in which the Fe
_61.6
Co
_16.4
Si
_10.8
B
_11.2
alloy was used as the magnetostrictive element and polyvinylidene fluoride (PVDF) as the piezoelectric one. The Fe
_61.6
Co
_16.4
Si
_10.8
B
_11.2
amorphous ribbon shows good magnetic properties, with a magnetostriction close to 30 ppm and a piezomagnetic coefficient in as-quenched state and for a long ribbon of 21.4 × 10
^-3
ppm/Am
^-1
. Even though PVDF shows a higher piezoelectric coefficient (d
₃₃
= 15 pC/N) than the high temperature poly and copolymides, the advantage of using these poly- and copolymides is the great stability shown at temperatures close to 200 °C. Considering this, the influence of temperature in laminated composites and in their components (epoxy, piezoelectric, and magnetostrictive constituents) has been measured and discussed.