Bonding technologies for chip level and wafer level 3D integration

This paper provides a comparison of bonding process technologies for chip and wafer level 3D integration (3Di). We discuss bonding methods and comparison of the reflow furnace, thermo-compression, Cavity ALignment Method (CALM) for chip level bonding, and oxide bonding for 300 mm wafer level 3Di. For chip 3Di, challenges related to maintaining thin die and laminate co-planarity were overcome. Stacking of large thin Si die with 22 nm CMOS devices was achieved. The size of the die was more than 600 mm
²
. Also, 300 mm 3Di wafer stacking with 45 nm CMOS devices was demonstrated. Wafers thinned to 10 μm with Cu through-silicon-via (TSV) interconnections were formed after bonding to another device wafer. In either chip or wafer level 3Di, testing results show no loss of integrity due to the bonding technologies.