Voltage controlled oscillator area reduction in nano-scale CMOS

A 4.3–5.6 GHz (26% tuning range) voltage controlled oscillator (VCO) incorporating MOS bypass capacitors, MOS varactors, cross-coupled transistors, a current source and buffers underneath an inductor is demonstrated in 65-nm CMOS. Use of a simple inverter based buffer enables straightforward placement under an inductor. The bypass capacitors and other components are used to form a patterned ground shield that improves inductor Q. The measured phase noise of the VCO is −117dBc/Hz at 1 MHz offset from a 4.3GHz carrier. The VCO power consumption is 4 mW. The circuit occupies an area of 14,400 μm
²
, and exhibits FOMa and FOMta of −202 and −210 dB, respectively. The FOMta is at least 10 dB better than the others in the literature. The area is ∼3X smaller compared to that of the VCO with all the components outside of the inductor.