A model-reference sliding mode for dual-stage actuator servo control in HDD

This paper presents a method of sliding mode control (SMC) designing and developing for the servo system in a dual-stage actuator (DSA) hard disk drive. Mathematical model of hard disk drive actuators is obtained, extracted from measuring frequency response of the voice-coil motor (VCM) and micro-actuator separately. The Matlab software tools are used for mathematical model estimation and also for controller design and simulation. A model-reference approach for tracking requirement is selected as a proposed technique. The simulation results show that performance of the model-reference SMC controller in DSA servo control can be satisfied in the tracking error, as well as keeping the positioning of the head within the boundary of +/-5% of track width under the presence of disturbance. The overall results of model-reference SMC design in DSA are met per requirement specifications and significant reduction in %off track is found when compared to the singlestate actuator (SSA).