New Fast Response Thin Film-Based Superconducting Quench Detectors

Quench detection on superconducting bus bars and other devices with a low normal zone propagation velocity and low voltage build-up is quite difficult with conventional quench detection techniques. Currently, on ATLAS superconducting bus bar sections, superconducting quench detectors (SQD) are mounted to detect quench events. A first version of the SQD essentially consists of an insulated superconducting wire glued to a superconducting bus line or windings, which in the case of a quench rapidly builds up a relatively high resistance that can be easily and quietly detected. We now introduce a new generation of drastically improved SQDs. The new version makes the detection of quenches simpler, more reliable, and much faster. Instead of a superconducting wire, now a superconducting thin film is used. The layout of the sensor shows a meander like pattern that is etched out of a copper coated 25
$\mu\hbox{m}$
thick film of Nb-Ti glued in between layers of Kapton. Since the sensor is now much smaller and thinner, it is easier to install and build up a high resistance with a much shorter response time. The design of the sensors is explained. The test results of the new sensors in a few variants in a calibration setup as well as when mounted on the windings surface of a magnet are reported.