Partial Access Mode: New Method for Reducing Power Consumption of Dynamic Random Access Memory

Demands have been placed on a dynamic random access memory (DRAM) to not only have increased memory capacity and data transfer speed, but also have reduced operating and standby currents. When a system uses a DRAM, a refresh operation is necessary because of its data retention time restriction: each bit of the DRAM is stored as an amount of electrical charge in a storage capacitor that is discharged by the leakage current. Power consumption for the refresh operation increases in proportion to the memory capacity. We propose a new method to reduce the refresh power consumption by effectively extending the memory cell retention time. Conversion from 1 cell/bit to 2
^N
cells/bit reduces the variation in the retention time among memory cells. Although active power increases by a factor of 2
^N
, the refresh time increases by more than 2
^N
as a consequence of the fact that the majority decision does better than averaging for the tail distribution of retention time. The conversion can be realized very simply from the structure of the DRAM array circuit, and it reduces the frequency of disturbance and power consumption by two orders of magnitude. On the basis of this conversion method, we propose a partial access mode to reduce power consumption dynamically when the full memory capacity is not required.