A simulation of a layered 6Li foil multi-wire proportional counter

The shortage of
³
He gas for neutron detection has led to alternative technologies for large-area high-efficiency neutron detectors. Recently, MCNP6-beta has been released and has the ability to track the energy of low mass particles, which now allows neutron detector pulse-height spectra to be simulated. A Monte-Carlo code generated in MatLab was used to validate the MCNP6-beta neutron response pulse-height spectra of a
⁶
Li foil multi-wire proportional counter. After validation, MCNP6 was used to optimize HDPE thicknesses in front and back of the detector against a
²⁵²
Cf neutron source. Additionally, the pulse-height spectra was obtained using MCNP6 for detector pressures of 1.0, 1.5, 2.0, and 2.8 atm. Lastly, the angular response was investigated and remained relatively constant over angles ranging from 0 to 45 degrees from normal incidence.