Multi-layer design of IP over WDM backbone networks: Impact on cost and survivability

To address the reliability challenges due to failures and planned outages, Internet Service Providers (ISPs) typically use two backbone routers at each central office to which access routers connected in a dual-homed configuration. At the IP layer, redundant backbone routers and redundant transport equipment to interconnect them are deployed, providing reliability through node and path diversity. However, adding such redundant resources increases the overall cost of the network. Hence, a fundamental redesign of the backbone network avoiding such redundant resources, by leveraging the capabilities of an agile optical transport network, is highly desired. In this paper, we propose such a fundamental redesign of IP backbones. Our alternative design uses only a single router at each office but uses the agile optical transport layer to carry traffic to remote Backbone Routers (BRs) in order to survive failures or outages of the single local BR. Optimal mapping of local Access Routers (ARs) to remote BRs is determined by solving an Integer Linear Program (ILP). We describe how our proposed design can be realized using current optical transport technology. We evaluate network designs for cost and performability, the latter being a metric combining performance and availability. We show significant reduction in cost for approximately the same level of reliability as current designs.