Polyethylene terephthalate - Its use as a capacitor dielectric

The steady increase in the severity of operating conditions for capacitors and the need for more diverse characteristics has spurred the search for new and better capacitor dielectrics. The synthetic plastics industry, which is the source of a number of useful dielectric materials, has recently produced a new and promising dielectric in film form known as polyethylene terephthalate or "Mylar." This material is unusually strong, has a high softening point, and is available in very thin films which makes it especially suitable for capacitor insulation. The electrical characteristics of capacitors wound with Mylar film are likewise promising. As compared to mineral-oil-impregnated paper capacitors, unimpregnated Mylar capacitors exhibit higher dielectric strength, higher insulation resistance, and can be operated at higher ambient temperatures. Their loss characteristics are comparable with those of impregnated paper and the capacitance stability over the usual range of ambient temperatures approaches that of mica capacitors. Mylar is relatively nonhygroscopic and tests indicate that for moderate atmospheric conditions capacitors made from it do not require additional moisture protection. The film can be metallized readily by current techniques and, when used in metallized capacitors, appears to possess advantages over metallized paper in several respects.