Using moderate inversion to optimize voltage gain, thermal noise, and settling time in two-stage CMOS amplifiers

This paper describes the use of moderate inversion for selected MOS transistors in a two-stage CMOS amplifier to achieve high voltage gain, low thermal noise, and fast settling time at minimum power consumption. A detailed circuit analysis, implemented in a MATLAB design tool, is presented to find the optimal inversion level for MOS transistors. The analysis and design tool are illustrated for a fully differential, two-stage, 0.5-μm CMOS amplifier having voltage gain >; 80 dB, input-referred thermal noise voltage <; 6 nV/Hz
^1/2
, gain bandwidth of 100 MHz, phase margin of 58°, and 0.1% settling time <; 15 ns for load capacitances of 6 pF and a supply voltage of 2.5 V. SPICE simulation results confirm that these specifications are achieved at a minimum supply current of 2.42 mA by operating first- and second-stage input transistors in moderate inversion compared to 3.82 mA for operation in strong inversion, resulting in a 37% decrease in power consumption.