Design of Multiway Power Divider by Using Stepped-Impedance Transformers

In this paper, the design of multiway power dividers by interconnecting power dividers with fewer output ports is studied by transforming them into multisection stepped-impedance transformers. By using this approach, it is easy to design multiway power dividers with required equal ripples of input reflection (
S
11 ) within a wide passband. The interconnecting lines can be used as additional matching sections to improve the input matching. General properties of this type of multiway power dividers can be easily obtained. Design of multiway power divider with required input reflection level can be readily performed by using the published data and tables of stepped-impedance transformer in the literature. Both even- and odd-mode analyses are performed to obtain the optimal isolation resistor values. A prototype of a wideband four-way power divider with a rhombic architecture is designed, fabricated, and measured. Simulation and measurement results are in good agreement and validate the proposed approach.