Formation of high quality screen-printed contacts to homogeneous high sheet resistance emitters (HHSE)

In this paper we report on the formation of high quality contacts to HHSE with a sheet resistance variation of ≥30 Ω/sq using a commercial front-side Ag paste, PV16A from DuPont. We fabricated and characterized solar cells with emitter sheet resistances of 65, 75, 85, 95 and 105 Ω/sq. We found that emitter sheet resistances in the range of 65-95 Ω/sq can be contacted with low average series resistance of 0.63-0.77 Ω-cm
²
and high fill factor (FF) of 77.4-78.8%. The 75 Ω/sq emitter gave the best average efficiency of 18.3%, followed by 18.2% for the 65 Ω/sq, 18.0% for the 85 Ω/sq, and finally 17.7% for the 95 Ω/sq. The 105 Ω/sq emitter gave a low FF due to high series resistance, but the shunt resistance and ideality factor were excellent, which suggests the paste was not encroaching the shallow emitter junction.