Disposition (reduction) of (negative) partial product for Radix 4 Booth's Algorithm

Multiplier, being a very vital part in the design of microprocessor, graphical systems, multimedia systems, DSP system etc. It is very important to have an efficient design in terms of performance, area, speed of the multiplier, and for the same Booth's multiplication algorithm provides a very fundamental platform for all the new advances made for high end multipliers meant for faster multiplication with higher performance. The algorithm provides an efficient encoding of the bits during the first steps of the multiplication process. In pursuit of the same, Radix 4 booths encoding has increased the performance of the multiplier by reducing the number of partial products generated. Radix 4 Booths algorithm produces both positive and negative partial products and implementing the negative partial product nullifies the advances made in different units to some extent if not fully. Most of the research work focuses on the reduction of the number of partial products generated and making efficient implementation of the algorithm. There is very little work done on disposal of the negative partial products generated. The presented work in the paper addresses the issue of disposal of the negative partial products efficiently by computing the 2's complement avoiding the additional adder for adding 1 and generation of long carry chain, hence. The proposed mechanism also continues to support the concept of reducing the partial product and in persuasion of the same it is able to reduce the number of partial product and also improved further from n/2 +1 partial products achieved via modified booths algorithm to n/2. Also, while implementing the proposed mechanism using Verilog HDL, a mode selection capability is provided, enabling the same hardware to act as multiplier and as a simple two's complement calculator using the proposed mechanism. The proposed technique has added advantage in terms of its independentness of the number of bits to be multiplied. It is tested and verified with varied test vectors of different number bit sets. Xilinx synthesis tool is used for synthesis and the multiplier mechanism has a maximum operating frequency of 14.59 MHz and a delay of 7.013 ns.