Abstract:
Nickel-iron alloys have useful magnetic properties that are of interest to the MEMS industry, but the high stress levels that can develop during the fabrication process p...Show MoreMetadata
Abstract:
Nickel-iron alloys have useful magnetic properties that are of interest to the MEMS industry, but the high stress levels that can develop during the fabrication process pose a real challenge. This paper addresses the characterisation of NiFe films using suspended rotating structures, electrical test structures and X-ray fluorescence measurements. An automated measurement system has been developed, which facilitates rapid wafer mapping to spatially compare stress levels at different stages of the fabrication process. This has been used, together with other wafer mapped parameters such as alloy composition, sheet resistance and layer thickness, to identify correlations and provide an increased understanding of the relationships between the different process control factors.
Date of Conference: 04-07 April 2011
Date Added to IEEE Xplore: 04 August 2011
ISBN Information: