A 40nm 2Gb 7Gb/s/pin GDDR5 SDRAM with a programmable DQ ordering crosstalk equalizer and adjustable clock-tracking BW

Most DRAM interfaces such as GDDR5 and DDR3 use parallel single-ended signaling due to pin-count restriction and backward compatibility. Notwithstanding poor signal and power integrity issues, GDDR5 speed reached beyond 5Gb/s in recent years by utilizing data bus inversion, error-detection coding, data training and channel equalization [1–3]. However, channel crosstalk is becoming a major barrier to further speed improvement. A common solution for channel crosstalk reduction at the system level is to use a shielding line or wide spacing between signal lines, but increasing the number of layers in a chip package and PCB increase system cost. To remove the shielding lines and increase speed, this paper presents a channel crosstalk equalizer with programmable signal ordering capability for the DRAM transmitter. In addition, this paper addresses tri-mode clocking to reduce the system jitter for better timing margin: PLL off, LC-PLL and injection-locked oscillator.