Investigation of the Role of H in Fabrication-Process- Induced Variations of ${\rm Nb}/{\rm Al}/{\rm AlO}_{x}/{\rm Nb}$ Josephson Junctions

The correct operation and high performance of complex superconducting integrated circuits significantly depend on fabrication-process-induced variations of the Josephson junction critical current I
_c
. Such variations in Nb/Al/AlO
_x
/Nb junctions were investigated and shown to be dependent on how the junction electrodes are connected to other layers in the integrated circuit, especially the ground plane and the Ti/Pd/Au contact pad. The observed enhancement of I
_c
and gap voltage over time for junctions with certain wiring connections suggests that the phenomenon is related to the diffusion over time of impurities between the junction electrode and the Ti/Pd/Au pad. Considering the strong affinity of both Nb and Ti to H, a model where H is the main impurity element involved in the diffusion-related phenomenon is presented. The results show that direct wiring to Ti is sufficient to observe I
_c
variations. The results also suggest that as fabricated, the interface between the junction counter-electrode and the AlO
_x
barrier is already close to or at full H saturation, significantly depressing the I
_c
by up to 20%, compared to clean Nb junctions.