Physicochemical characterization of the thermal aging of insulating paper in power transformers

A study carried out jointly by Hydro Quebec, Electricite de France and the Ecole Nationale Superieure de Chimie de Toulouse has allowed researchers to qualify the thermal resistance of three different types of thermostable paper insulation. These papers have been selected as being representative of what is available on the market today. The paper samples were subjected to a thermal aging test in the presence of mineral oil to represent normal conditions of operation (150/spl deg/C). The thermal degradation of the paper insulation is characterized by various physicochemical methods including measurement of the degree of polymerization, determination of 2-furfural in mineral oil by HPLC as well as determination of various sugars (monosaccharides, polysaccharides and anhydrosugars) in the paper using ion chromatography. This last method allows us to verify the formation of cellobiose, which is the real repeat unit of cellulose, as well as that of levoglucosan, which is an anhydrosugar and a precursor of 2-furfural. The evolution of all of these parameters, measured as a function of time, has allowed us to compare the thermal resistance of various insulating papers. The results of this study seem to show that, compared to traditional kraft paper, certain paper types are more susceptible to being thermally upgraded than others. This study also allowed us to demonstrate that the use of an inhibitor in mineral oil (DBPC) does not seem to influence the thermal degradation of these papers.