High Effective Gummel Number of CVD Boron Layers in Ultrashallow $\hbox{p}^{+}\hbox{n}$ Diode Configurations

Deposited boron layers fabricated by exposing silicon to diborane (B
₂
H
₆
) gas in an atmospheric-pressure chemical vapor deposition reactor are investigated with respect to their electrical properties. At the applied temperatures from 500°C to 700°C, the deposition forms a nanometer-thick layer stack of amorphous boron (α-B) and boron-silicon compound (B
_x
Si
_y
), whereas the crystalline Si substrate is p-doped to depths below 10 nm, depending on the temperature and exposure time. The as-deposited layers can be used to fabricate high-quality p
⁺
n diodes with low series resistance and low saturation current values that are comparable with those of conventional deep p
⁺
junctions. By investigating p-n-p structures with p
⁺
B-deposited emitters, it is shown that the presence of the α-B layer increases the effective Gummel number of the diffused emitter up to about a factor of 60. The α-B layer is also demonstrated to be a stable and controllable supply of B for the formation of deep p-type regions by thermal drive-in.