On the design of a UAS flight plan monitoring and edition system

This paper addresses various aspects of the design and development of the pilot interface for the exploitation of highly advanced flight plan capabilities specifically designed for Unmanned Aerial Systems (UAS). This flight plan capabilities are built on top a flexible and reusable hardware/software architecture designed to facilitate the development of UAS-based applications. This flexibility is organized into an user-parameterizable UAS Service Abstraction Layer (USAL). The USAL defines a collection of standard services are their interrelations as a basic starting point for further development by UAS users. Previous research presented the advanced flying capabilities of a UAS as an extension of the Flight Control System (FCS) functionalities. Assuming a UAS with a FCS that ensures safe and stable maneuvers, we complement it with a highly capable flight plan management system. USAL flight plan is characterized by offering semantically much richer constructs than those present in most current UAS autopilots, which rely on simple lists of waypoints. This list of waypoints approach has several important limitations: it is difficult to specify complex trajectories and it does not support constructs such as conditional forks or iterations, small changes may imply having to deal with a considerable amount of waypoints and it provides no mechanism for adapting to mission time circumstances. To address these issues a new flight plan specification mechanism is proposed, that incorporates a leg concept extended to accommodate higher level constructs for specifying iterations and forks. Additional leg types, referred to as parametric leg, are also introduced. The trajectory defined by a parametric leg is automatically generated as a function of mission variables, enabling dynamic behavior and providing a very valuable means for adapting the flight to the mission evolution. Another level of adaption is provided by the conditions governing the decision-making in intersection legs and the finalization of iterative legs. In this work we will focus on the development of the pilot interface for the exploitation of the introduced flight plan capabilities. The interface design requirements address an increase level of automated operation and support to react to unexpected requirements due to mission changes. Therefore, this interaction includes the available mechanisms to update the flight-plan according to UAS mission requirements, skip parts of it, react to operational contingencies, etc.