Reversible Transverse Stress Effects on the Critical Current of an Internal Tin ${\rm Nb}_{3}{\rm Sn}$ Strand Under Axial Strain

We have developed an apparatus to investigate the effect of transverse stress under axial strain on the critical current of superconducting strands. An internal tin Nb
₃
Sn wire is soldered on a C-shape ring (called Pacman) made of 2% beryllium doped copper alloy and axial strain from -0.7 to 0.7% can be applied. The actual strain on a sample was estimated from a comparison with the critical current measurement results using a Walter spiral probe. Reversible transverse stress effects on the critical current were studied in this work and the transverse pressure was applied up to 40 MPa under ±0.5% axial strain. The critical current was initially increased about 3% as transverse load was applied and then decreased almost linearly under compressive axial strain. Similar behavior is observed under tensile axial strain but the critical current decreases rather sharply at higher load. A unified description based on 3 dimensional deviatoric strain was difficult for the sample studied in this work.