Application of denoising techniques to PD measurement utilising UHF, HFCT, acoustic sensors and IEC60270

Noise has been a major problem in Partial Discharge (PD) measurement, hampering its effectiveness as a means of assessing insulation condition and of diagnosing faults in power plant insulation. The problem has become more evident in recent years as efforts are made to adopt on-line PD-detection for practical plant insulation condition monitoring. The majority of PD detection systems use Ultra High Frequency (UHF), High Frequency Current Transformer (HFCT), Acoustic Emission (AE) sensors or IEC60270 standard electrical contact systems. Despite great advances which have been achieved in hardware instrumentation over the past years, various forms of noise still affect PD measurements, irrespective of the type of measurement system employed. This paper presents the experience which the authors have accumulated in recent years dealing with noise in PD measurement using the four, aforementioned, measurement systems. Following a brief comparison of the requirement for signal analysis of the four PD measurement systems, the paper addresses the source of noise that often appears in practical applications. Denoising techniques such as the traditional digital filters, matched filters, discrete wavelet transforms and the second generation wavelet transforms will then be introduced and contrasted in terms of their distinct features, advantages and disadvantages. The most effective technique will then be proposed for the four PD measurement systems discussed. Real world data will be used to support the conclusions of the paper.