Adaptive combined DFE/MLSE techniques for ISI channels

By embedding a decision-feedback equalizer (DFE) into the structure of a maximum-likelihood sequence estimator (MLSE), an adaptive combined DFE/MLSE scheme is proposed. In this combined DFE/MLSE, the embedded DFE has three functions: (i) prefiltering the received signals and truncating the equivalent channel response into the desired one, (ii) compensating for channel distortions, and (iii) providing the MLSE detector with predicted values of input signals. Since the embedded MLSE detector operates on the predicted signals the detected symbols at the output of the DFE/MLSE do not suffer any delay and can be directly fed back into the embedded DFE so that the error propagation, which usually takes place in a conventional DFE, can be greatly reduced. Analytical and simulation results indicate that the performance is significantly improved by the DFE/MLSE compared to the conventional DFE while its computation complexity is much less than that of the conventional MLSE receiver. The combined DFE/MLSE can use different adaptive structures (block-updating, sliding window updating or symbol-by-symbol updating) to meet different performance objectives. Moreover, the proposed DFE/MLSE provides a trade-off between performance and complexity with a parameter m representing the MLSE detection depth as well as the number of predicting steps of the embedded DFE. For some particular values of m, this scheme is capable of emulating the conventional DFE, MLSE-VA, adaptive LE-MLSE equalizer, adaptive DDFSE, and adaptive BDFE without detection delay.