A short-wavelength selective reach-through avalanche photodiode

A new reach-through avalanche photodiode, designed for use with sources of short-wavelength light such as scintillators, is described. The device has a double junction p/sup +/-p-n-p/sup -/-n/sup +/ structure in which the central three layers, which comprise about 99% of the device thickness, are fully depleted. The p/sup +/ light-entry surface extends across the whole device and can be placed in contact with a scintillator. The multiplying p-n junction is buried and is located about 4 /spl mu/m below the p/sup +/-layer so that only primary photo-electrons generated by short-wavelength (i.e., strongly absorbed) light are fully multiplied. The p/sup -/-n/sup +/ junction, or array of junctions, is located at the back of the wafer and is surrounded by a guard-ring. Typical characteristics for a device 120 /spl mu/m thick and having a 25 mm/sup 2/ sensitive area, are a QE of 80% at 480 nm, a capacitance of 30 pF, operating voltage of <500 V, a speed of response of /spl sim/3 ns, a noise current of less than 1 pA/Hz/sup 1/2/ at a gain of 100, and an effective k value of 0.030.