A Blind Navigation System Using RFID for Indoor Environments

A location and tracking system becomes very important to our future world of pervasive computing, where information is all around us. Location is one of the most needed information for emerging and future applications. Since the public use of GPS satellite is allowed, several state-of-the-art devices become part of our life, e.g. a car navigator and a mobile phone with a built-in GPS receiver. However, location information for indoor environments is still very limited. Several techniques are proposed to get location information in buildings such as using a radio signal triangulation, a radio signal (beacon) emitter, or signal fingerprinting. Using radio frequency identification (RFID) tags is a new way of giving location information to users. Due to its passive communication circuit, RFID tags can be embedded almost anywhere without an energy source. The tags stores location information and gives it to any reader that is within a proximity range which can be up to 10-15 meters for UHF RFID systems. We propose an RFID-based system for navigation in a building for blind people or visually impaired. The system relies on the location information on the tag, a userpsilas destination, and a routing server where the shortest route from the userpsilas current location to the destination. The navigation device communicates with the routing server using GPRS networks. We build a prototype based on our design and show some results. We found that there are some delay problems in the devices which are the communication delay due to the cold start cycle of a GPRS modem and the voice delay due to the file transfer delay from a MMC module.