Notice of Violation of IEEE Publication Principles: New distribution class arrester ground lead disconnector design

Notice of Violation of IEEE Publication Principles

"New Distribution Class Arrester Ground Lead Disconnector Design,"
by Yong-Sung Choi; Ju-Ho Yun; Hyang-Kon Kim; Chung-Seog Choi; Kyung-Sup Lee,
in the Proceedings of the 2008 International Conference on Condition Monitoring and Diagnosis, 21-24 April 2008, pp 731-734

After careful and considered review of the content and authorship of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE's Publication Principles.

This paper is a near duplication of the original text from the papers cited below. The original text was copied without attribution and without permission.

Due to the nature of this violation, reasonable effort should be made to remove all past references to this paper, and future references should be made to the following articles:

"New Distribution Class Arrester Ground Lead Disconnector Design Enhances Detonation Reliability and Improves Arrester Performance,"
by Lenk, D.W,
in the Proceedings of the 2004 Power Systems Conference and Exposition, 10-13 Oct. 2004, vol. 3, pp. 1397-1406
This paper examines performance characteristics of existing distribution class arrester ground lead disconnecting devices. The paper also introduces a new Distribution Class ground lead disconnector design that not only extends the claimable detonation range well below the 20 amps specified in industry standards, but is very durable when exposed to severe arrester durability tests. Finally, this paper shows how this next generation disconnector interacts with the connected arrester to improve the overvoltage withstand capability of the arrester assembly.