Active self supplied AC-DC converter for piezoelectric energy scavenging systems with supply independent bias

The paper focuses on an electronic interface which can be used into Piezoelectric Energy Scavenging Systems (PESS). These systems convert the energy of mechanical vibrations into electrical energy using a piezoelectric transducer to realize a power supply for low power electronic systems. To obtain a suitable supply source an AC-DC conversion of the output signal of these transducers is needed and, since the output power level of the energy scavenger can be very low, the conversion should be as efficient as possible. This paper shows an active voltage doubler AC-DC converter for PESSs. A novel driving circuitry topology is presented; it has the advantage to be tolerant with respect to the process variations. The converter uses exclusively a fraction of the harvested energy to supply itself and a bias circuit has been designed to make the total current consumption supply independent. The simulation results show that the efficiency of the AC-DC converter can be as high as 94%. The circuit will be diffused in 0.35μm CMOS STMicroelectronics technology.