Modeling and predicting application performance on parallel computers using HPC challenge benchmarks

A method is presented for modeling application performance on parallel computers in terms of the performance of microkernels from the HPC Challenge benchmarks. Specifically, the application run time is expressed as a linear combination of inverse speeds and latencies from microkernels or system characteristics. The model parameters are obtained by an automated series of least squares fits using backward elimination to ensure statistical significance. If necessary, outliers are deleted to ensure that the final fit is robust. Typically three or four terms appear in each model: at most one each for floating-point speed, memory bandwidth, interconnect bandwidth, and interconnect latency. Such models allow prediction of application performance on future computers from easier-to-make predictions of microkernel performance. The method was used to build models for four benchmark problems involving the PARATEC and MILC scientific applications. These models not only describe performance well on the ten computers used to build the models, but also do a good job of predicting performance on three additional computers with newer design features. For the four application benchmark problems with six predictions each, the relative root mean squared error in the predicted run times varies between 13 and 16%. The method was also used to build models for the HPL and G-FFTE benchmarks in HPCC, including functional dependences on problem size and core count from complexity analysis. The model for HPL predicts performance even better than the application models do, while the model for G-FFTE systematically underpredicts run times.