SiC based solid state power controller

The latest generation of fighter aircraft utilizes a 270Vdc power system [1]. Such high voltage DC power systems are difficult to protect with conventional circuit breakers because the current does not automatically go to zero twice per cycle during a fault like it does in an AC power system and thus arcing of the contacts is a problem. Solid state power controllers (SSPCs) are the solid state equivalent of a circuit breaker that do not arc and which can respond more rapidly to a fault than a mechanical breaker [2,4]. Present SSPCs are limited to lower voltages and currents by the available power semiconductors [3]. This paper presents design and experimental results for a SSPC that utilizes SiC power JFETs for the SSPC power switch to extend SSPC capability to higher voltages and currents in a space that is smaller than what is practically achievable with a Si power switch. Methods for testing SiC JFET devices under transient thermal conditions unique to the SSPC application was also presented.