High Response Control of Stator Watts and Vars for Large Wound Rotor Induction Motor Adjustable Speed Drives

Extremely rapid control response (0.01 s) of stator watts and vars has been obtained on a 15 000-hp wound rotor induction machine with a cycloconverter controlled secondary by means of an orthogonal control scheme which linearizes the machine equations and combines both feedforward and feedback error signals. Leading and lagging power factor and positive or negative stator power flow can be smoothly and rapidly controlled over a speed range in excess of ±35 percent of the induction motor synchronous speed. This doubly fed drive may be termed a "Scherbiustat drive" because the wound rotor induction motor secondary power conversion equipment is the static equivalent of the Scherbius machine. This type of a drive does not employ a dc link in the motor secondary power conversion equipment. It should not be confused with a static Kraemer drive which employs a dc link in the frequency conversion process and was so named because of its similarity to the original Kraemer drive which uses a synchronous converter and a dc motor in the secondary power conversion process. Recently obtained field results have verified the original study results discussed herein.