On Modeling of Parallel Repeater-Insertion Methodologies for SoC Interconnects

Parallel repeaters are proven to outperform serial repeaters in terms of delay, power and silicon area when regenerating signals in system-on-chip (SoC) interconnects. In order to avoid fundamental weaknesses associated with previously published parallel repeater-insertion models, this paper presents a new mathematical modeling for parallel repeater-insertion methodologies in SoC interconnects. The proposed methodology is based on modeling the repeater pull-down resistance in parallel with the interconnect. Also, to account for the effect of interconnect inductance, two moments were used in the transfer function, as opposed to previous Elmore delay models which consider only one moment for
RC
interconnects. A direct consequence of this new type of modeling is an increased challenge in the mathematical modeling of interconnects. HSpice electrical and C++/MATLAB simulations are conducted to assess the performance of the proposed optimization methodology using a 0.25-
mu
m CMOS technology. Simulation results show that this repeater-insertion methodology can be used to optimize SoC interconnects in terms of propagation delay, and provide VLSI/SoC designers with optimal design parameters, such as the type as well as the position and size of repeaters to be used for interconnect regeneration, faster than with conventional HSpice simulations.