New Parallel Shortest Path Searching Algorithm based on Dynamically Reconfigurable Processor DAPDNA-2

This paper proposes a parallel shortest path-searching algorithm and implements it on a newly structured parallel reconfigurable processor, DAPDNA-2 (IPFlex Inc). Routing determines the shortest paths from the source to the ultimate destination through intermediate nodes. In open shortest path first (OSPF), Dijkstra's shortest path algorithm, which is the conventional one, finds the shortest paths from the source on a program counter-based processor. The calculation time for Dijkstra's algorithm is O(N²) when the number of nodes is N. When the network scale is large, calculation time required by Dijkstra's algorithm increases rapidly. It's very difficult to compute Dijkstra's algorithm in parallel because of the need for previous calculation results, so Dijkstra's algorithm is unsuitable for parallel processors. Our proposed scheme finds the shortest paths using a simultaneous multi-path search method. In contrast with Dijkstra's algorithm, several nodes can be determined at one time. Moreover, we partition the network into different groups (network groups) and find the all-node pair's shortest path in each group using a pipeline operation. Networks can be abstracted, and the shortest paths in very large networks can be found easily. The proposed scheme can decrease calculation time from O(N²) to O(N) using a pipeline operation on DAPDNA-2. Our simulations show that the proposed algorithm uses 99.6% less calculation time than Dijkstra's algorithm. The proposed algorithm can be applied to the very large Internet network designs of the future.