The operation of permanent magnet DC motors powered by a common source of solar cells

In a photovoltaic water-pumping system, the solar cell array is usually designed to power a single motor-load pump. Several water-pumping systems of the same or different types that are in close proximity to each other can be powered by separate solar cell arrays (sources) for each one, or, alternatively, by a common solar cell source for all the water pumping systems. The authors introduce a procedure for comparing the performances of these two setups. One system includes a permanent magnet DC motor and a volumetric pump, and the other a permanent magnet DC motor and a centrifugal pump. The comparison was also done for the same systems when a maximum-power point tracker (MPPT) was included for both the separate and the common solar cell source. It is shown, for example, that in systems not including MPPTs the total performance of the two motor-pumps in the common source system is improved as compared to the performance of the two motor-pumps when they are powered separately by individual sources.<
>