Simultaneous estimation of echo path and channel responses using full-duplex transmitted training data sequences

To reduce the system initialization time in high-speed full-duplex data transmission over two-wire lines, we propose an efficient full-duplex fast training algorithm which can simultaneously estimate the impulse responses of echo paths and channels at both ends. Two mutually orthogonal periodic sequences are designed and used to co-estimate the near echo, the far echo with bulk delay, and the channel response. The new algorithm can reduce the tap-setting time to half of that required by the traditional half-duplex fast training schemes. The effects of channel noise and symbol rate offset between two ends are examined in terms of both mean-square error (MSE) and signal-to-noise ratio (SNR). Both the theoretical analysis and computer simulation show that there are three degrading factors due to symbol rate offset. The SNR is inversely proportional to the sum of the estimated coefficients, the half period of the training sequences, and the square of symbol rate offset. If the far-signal-to-channel-noise ratio is 30 dB, then the degradation is significant when the symbol rate offset is more than 10/sup -4/. If it is 40 dB, then the degradation is significant when the symbol rate offset is above 3/spl times/10/sup -5/.<
>