Hybrid finite element-modal analysis of jet engine inlet scattering

With the goal of characterizing jet engine inlets, a hybrid finite element-modal formulation is presented for the analysis of cavities with complex terminations. The finite element method (FEM) is used to find the generalized scattering matrix for an N-port representation of the complex termination. Where N is the number of traveling modes in the cavity. The cavity is assumed to be circular at the termination (engine) but the remainder of the cavity can be of arbitrary cross section. The scattered fields are obtained by tracing the fields back out of the cavity via a high frequency or modal technique with the generalized scattering matrix used in determining the fields at an aperture near the irregular cavity termination. "Proof of concept" results are presented and several issues relating to the implementation of the FEM are addressed. Among these, a new artificial absorber is developed for terminating the FEM mesh and the suitability of edge or node based elements is examined.<
>