Improved 8/spl times/8 integrated optical matrix switch using silica-based planar lightwave circuits

An improved 8/spl times/8 optical matrix switch was fabricated using silica-based planar lightwave circuits (PLCs) on a silicon substrate. Three improvements were made. First, the waveguide material was changed from titanium-doped silica (SiO/sub 22/-TiO/sub 2/) to germanium-doped silica (SiO/sub 22/-GeO/sub 2/) to reduce propagation loss. Second, offset driving powers were supplied to every switch unit to realize high extinction ratios. Third, the dummy switch units were modified to suppress the crosstalk through these units. The average insertion loss of the fabricated device was 3.81 db in the TE mode and 3.82 dB in the TM mode. The average extinction ratio of the switch units was 25.3 dB in the TE mode and 22.3 dB in the TM mode. The accumulated crosstalk was estimated to be less than -14 dB in the TE mode and -11 dB in the TM mode. The average driving power of the phase shifter in the on-state was 0.54 W in the TE mode and 0.52 W in the TM mode. The switching response time was 1.3 ms. The packaged 8/spl times/8 matrix switch with additional fiber-waveguide coupling loss of 2.7 dB was successfully employed in photonic multimedia switching and photonic inter-module connector system experiments.<
>