Analysis of the ferroresonant transformer with a rectified output in the low-line-voltage minimum-line-frequency full-load condition

Most previous analyses of the ferroresonant transformer address the unrectified-output AC-load case, and do not include some or all of the important loss mechanisms. The analysis reported in this paper addresses the rectified-output DC-load case and includes the stray losses. The low-line-voltage minimum-line-frequency full-load condition is the focus of this analysis because it is the worst-case condition for supplying power to the load. Assumptions about the operation of the transformer in this worst-case condition lead to a simplified equivalent circuit. Given equivalent-circuit element values, a special-purpose time-domain computer simulation analyzes transformer performance in the periodic steady-state condition. This analysis technique is used to find equivalent-circuit element values for which the transformer winding currents are a minimum and the input power factor and conversion efficiency are at a maximum.<
>