Generation of high power 140 GHz microwaves with an FEL for the MTX experiment

We have used the improved ETA-II linear induction accelerator (ETA-III) and the IMP steady-state wiggler to generate high power (1-2 GW) microwaves at 140 GHz. The FEL was used in an amplifier configuration with a gyrotron driver. Improved control of energy sweep and computerized magnetic alignment in ETA-III resulted in small beam corkscrew motion (<1.5 mm) at 6 Mev, 2.5 kA. Reduction of wiggler errors (<0.2%), improved electron beam matching, and tapered wiggler operation resulted in peak microwave power (single-pulse) of up to 2 GW. These pulses were transported to the MTX tokamak for microwave absorption experiments. In addition, the FEL was run in a burst mode, generating 50-pulse bursts of microwaves; these results are discussed elsewhere.<
>