Increased junction breakdown voltages in silicon-on-insulator diodes

A junction breakdown model and the results of PISCES II simulations are presented for silicon-on-insulator (SOI) devices. This model shows the dependence of breakdown voltage in fully depleted (FD) SOI diode on the backgate bias, the properties of the buried oxide layer, and the device parameters. Breakdown in a thin FD SOI diode is quite different from that observed in a thicker, partially depleted (PD) diode. The analysis is supported by breakdown voltage measurements of separation by implantation of oxygen (SIMOX)-based SOI diodes, the results of which suggest that body breakdown is dominant in FD SOI diodes, and the junction curvature effect is dominant in PD SOI diodes. Furthermore, the results also show that breakdown voltage in the FD SOI diode is higher than their bulk-silicon counterpart and can be further increased by applying the appropriate backgate bias.<
>