The study of SPRM method for a short-length rod-shaped sample

The SRPM (simultaneous resistivity and permeability measurement) method, which simultaneously estimates the electrical and magnetic properties of a rod-shaped sample conductor, has been studied. In the SRPM method, the theoretical and measured values of the difference in the complex impedance of a solenoid coil with and without the sample are used. To estimate the resistivity of a short-length sample, the difference in the complex impedance was calculated by the method of weighted residual (MWR), as the difference calculated by the former SRPM method was valid only for a longer sample. The resistivity of copper samples of various lengths was estimated by the SRPM method, and their ratios to those measured by the DC four-probe method were obtained. The ratio was less than 1.3% when the ratio of the length of the sample conductor to the length of the solenoid coil was larger than 1 and less than 3.1% when the length ratio was less than 1.<
>