Variable reluctance rotor structures-their influence on torque production

Switched reluctance (SR) motors with differing structures are compared in terms of their torque prediction capabilities. The first structure is doubly salient with conventional laminations, also referred to as the CRS motor. The second has semiclosed stator slots and a cylindrical rotor with anisotropic magnetic properties arising from axial laminations interleaved with nonmagnetic material, also referred to as the CRR motor. The second structure has been claimed, on theoretical grounds, to be the superior structure in terms of torque per stator volume. The present comparison, based on RMS currents, concludes that the torque produced by the conventionally laminated motor is approximately 2.5 times that of the anisotropic design when the two copper losses are equalized. However, when the CRR motor has been optimized in terms of magnetic and electric loading, the CRS motor is still twice as torque productive. These results reverse the benefits previously claimed for the anisotropic motor design.<
>