An efficient method of passive emitter location

The problem of locating a stationary emitter from passive bearing and frequency measurements taken by a moving and autonomously operating sensor along its trajectory is considered. The estimation procedure based on bearings only is quite different from that based on frequency measurements. From the Cramer-Rao (CR) analysis of the single-measurement case, the characteristic features of each method become transparent and an intuitive understanding of both methods is provided. One of the major results is that the orientation of the error ellipses of the bearings method (BM) and frequency method (FM) differ significantly. From this a considerable integration gain in accuracy results, when processing the combined set of bearing and frequency measurements. The results of the theoretical CR analysis are verified in a numerical simulation based on the maximum-likelihood (ML) estimation. The simulations demonstrate that a combined method is definitely superior to BM and FM with respect to the bias and the size of the error ellipses.<
>