A transflective liquid crystal display using an internal wire grid polarizer

To obtain high transmittance and reflectance simultaneously, a single cell gap transflective liquid crystal (LC) display using internal wire grid polarizer (WGP) is proposed. For the reflective mode, the imbedded WGP serves as a polarization-dependent reflector for the ambient light. For the transmissive mode, no achromatic quarter-wave film is needed. This device can be used as a normally black mode (using vertical alignment) and a normally white mode (using twist-nematic alignment), based on the initial LC cell alignment. Detailed electro-optic performance, such as voltage-dependent light efficiency and viewing angle of these two device configurations, is investigated.