Metal-defined polymeric variable optical attenuator

A variable optical attenuator (VOA) based on a metal-defined polymeric optical waveguide has been demonstrated for the first time. The metal film stressor deposited on top of the upper cladding layer not only produces the refractive index change within the core layer, but also acts as a thin-film heater allowing thermal tuning of the optical power within a metal-defined optical waveguide. Fabricated devices exhibit greater than 25 dB of optical attenuation with an applied electrical current of /spl sim/40 mA at 1550-nm wavelength. The switching speed of the VOA exhibits 800 μs of rising and 720 μs of falling time.