A PC-based speech processor for cochlear implant fitting that can be adjusted in real-time

Cochlear implants are electrical prostheses that partially replace the functions of the human ear. They bypass normal hearing operation to directly simulate the auditory nerve with electric current. The input acoustic signal passes through a filter bank and the output of each filter modulates the energy of a stimulation waveform delivered to a different intra-cochlear electrode. This approach attempts to mimic the signal processing that takes place in a normal ear. When fitting a cochlear implant to a patient who has lost his hearing after learning language, one important problem is how to optimize the frequency range of the filter bank This optimization seeks a tradeoff between maximum speech perception and the patient's subjective preference. Unfortunately, currently available tools to change the frequency-to-electrode mapping (i.e., the frequencies of the filter bank) are cumbersome to use. In a previous project we developed a real time speech processor for the Nucleus-22 and Nucleus-24 cochlear implants, based on a common PC and additional hardware drivers. The present project involves the development of a similar system that is adjustable in real time. In other words, the patient can modify the frequency-to-electrode map using computer keystrokes, and a visual representation of the frequency range employed by the filter bank is displayed on the monitor. The patient adjusts the frequency range interactively and selects the preferred setting in a much faster way than can be accomplished with commercially available hardware. If successful, this approach may be implemented in the next generation of hardware used to program cochlear implants in the clinic.