Recent Advances in the Design and Implementation of Practical Fiber Optical Parametric Amplifiers

Fiber optical parametric amplifiers (OPAs) are based on the third-order nonlinear susceptibility of glass fibers. If two strong pumps and a weak signal are fed into a fiber, an idler is generated. Signal and idler can grow together if pump power is high enough, and phase matching occurs. In recent years, impressive performance has been demonstrated in several respects: 1) Gain in excess of 60 dB has been obtained; 2) fiber OPAs can exhibit a large variety of gain spectra: a gain bandwidth of 400 nm has been demonstrated; tunable narrowband gain regions can also be generated; 3) Noise figure of 3.7 dB, limited by other third-order nonlinear process; 4) Polarization-insensitive operation in both one-pump and two-pump configurations; 5) The presence of the idler can be used for wavelength conversion. Also, the spectrum of the idler is inverted with respect to that of the signal; thus by placing an OPA in the middle of a fiber span one can realize mid-span spectral inversion (MSSI) which counteracts the effect of fiber dispersion and some nonlinear effects. Besides using fiber OPA in continuous-wave regime as in typical systems, pulsed-pump has also been demonstrated to achieve larger bandwidth and higher peak gain by combining with optical filtering technique. Furthermore, by modulating the pump it is possible to modulate signal and/or idler at the output. This can be used to implement a variety of signal processing functions, including: fast signal switching; demultiplexing of time-division-multiplexed signals; retiming and reshaping of waveforms; optical sampling. A number of challenges must be overcome in order for fiber OPAs to be useful in communication applications. In multi-wavelength systems, these are: four-wave mixing, cross-phase modulation; and cross-gain modulation between signals. Furthermore, the pump-to-signal relative intensity noise (RIN) transfer and frequency/phase modulation (FM/PM) to signal intensity conversion are also potential challenges for practical fiber OPAs