A delay filter for an ir-UWB front-end

A continuous-time analog delay is designed as a requirement for the autocorrelation function in the quadrature downconversion autocorrelation receiver (QDAR). An eight-order Fade approximation of its transfer function is selected to implement this delay. Subsequently, the orthonormal form is adopted, which is intrinsically semi-optimized for dynamic range, has low sensitivity to component mismatch, high sparsity and whose coefficients can be physically implemented. Each coefficient in the state-space description of the orthonormal ladder filter is implemented at circuit level using a novel 2-stage gm cell employing negative feedback. Simulation results in IBM's Bi-CMOS 0.12 /spl mu/m technology show that this delay filter requires a total current of 70 mA at a 1.6 V power supply. The 1-dB compression point of the delay is at 565 mV and the SNR is 47.5 dB. On performing a Monte Carlo simulation it becomes evident that the response of the frequency selective analog delay does not suffer drastically from neither process variations nor component mismatch.