Feedback linearization of active magnetic bearings: current-mode implementation

Feedback linearization is a promising approach to the nonlinear control problem posed by active magnetic bearing systems. In this paper, feedback linearization is employed in combination with robust control techniques for the regulation of a single axis test rig actuated by a multiple pole magnetic bearing. To this end, a nonlinear polynomial model of the magnetic actuator was developed based on its experimental calibration. The effect of the amplifier and measurement system dynamics on the feedback linearization performance, was also examined, and compensation filters were developed. Finally, an uncertainty framework was proposed for the linearized plant, and a robust controller was designed via /spl mu/ synthesis. Experimental results demonstrate that the feedback-linearized active magnetic bearing system can achieve stability and the specified performance over the entire range of bearing clearance. The introduction of compensation filters is shown to be essential to this result.