Unstrained InAlN/GaN HEMT structure

InAlN has been investigated as barrier layer material for GaN-HEMT structures, potentially offering higher sheet charge densities (Kuzmik, 2002) and higher breakdown fields (Kuzmik, 2001). Lattice matched growth of the barrier layer can be achieved with 17% in content, avoiding piezo polarization. In this configuration the sheet charge density is only induced by spontaneous polarization. First experimental results of unpassivated undoped samples realized on 111-Si substrate exceed a DC output current density of 1.8 A/mm for a gate length of 0.5 /spl mu/m. Small signal measurements yield a f/sub t/ = 26 GHz and f/sub max/ = 14 GHz, still limited by the residual conductivity of the Si-substrate. A saturated output power at 2 GHz in class A bias point yielded a density of 4.1W/mm at V/sub DS/ = 24 V.