Digital control of induction motor current with deadbeat response using predictive state observer

For a high-power induction motor drive, the switching frequency of the inverter cannot become higher than one kilohertz, and such a switching frequency produces a large current ripple, which then produces torque ripple. To minimize the current ripple, a method based on deadbeat control theory for current regulation is proposed. The pulsewidth modulation (PWM) pattern is determined at every sampling instant based on stator current measurements, motor speed, current references, and rotor flux vector, which is predicted by a state observer with variable poles selection, so that the stator currents are controlled to be exactly equal to the reference currents at every sampling instant. The proposed method consists of two parts: (1) derivation of a deadbeat control and (2) construction of a state observer that predicts the rotor flux and the stator currents in the next sampling instant. This paper describes a theoretical analysis, computer simulations and experimental results.<
>