Bandwidth and noise of submillimeter wave cuprate bicrystal Josephson junction detectors

Detectors made from superconducting cuprate YBa/sub 2/Cu/sub 3/O/sub x/ bicrystal Josephson junctions (BJJs) on sapphire and NdGaO/sub 3/ substrates have been fabricated and characterized in the frequency band 200-900 GHz. Junctions on sapphire substrates had a normal state resistance R/sub N//spl ap/15-60 /spl Omega/, and I/sub C/R/sub N/ product up to 2.5 mV at T=4.2 K. Junctions on NdGaO/sub 3/ substrates had lower R/sub N/=1-5 /spl Omega/ and I/sub C/R/sub N/=0.4-0.9 mV at T=77 K. Three types of detecting devices have been investigated in both the broadband and the frequency-selective detection modes. One type was patterned with log-periodic antenna, and two others with Pt-metal double-slot antenna designed for a central frequency f=300 GHz and f=400 GHz, respectively. Measurements at f=320 GHz of the reception bandwidth /spl Delta/f for a device with double-slot antenna gave a quality factor Q=f//spl Delta/f/spl ap/10. A low-noise cooled 1-2 GHz bandwidth amplifier enables a better sensitivity in the self-pumping frequency mixing mode, avoiding the 1/f noise. The dependence of the spectral density of noise on voltage was compared to the data for the Josephson emission linewidth obtained by the selective detector response method. Also discussed are measurements at 500 GHz of the NEP values carried out at different experimental conditions.